CALL US TODAY 954-990-4813
Positive Company & Positive People!
General Installation Instructions for Blinds & Shades.
​
Get acquainted with your blind or shade components and terms prior to installing. Treat your blinds/shades with care beginning with the unpacking. Please DO NOT use scissors or any other sharp tools while unwrapping. The lift strings, etc can be easily cut during this step. Suggested tools needed to complete installation are: Pencil; Slotted or 1/4" Nut Screw Driver; Hand or electric drill; 3/32" Bit; and Measuring Tape. Inside, Outside or ceiling mount: your blind has been produced exactly to your specifications to fit inside or outside your window frame. Do not drill holes into the mounting surface. Screw the screws through the bracket into the mounting surface.
​
Let's Get Started
​
1Place the headrail of the blind where you desire to mount it. Care must be taken to mount the headrail level. This can be done by lowering the headrail to clear any obstructions. Once it is positioned properly, pencil a reference mark at each end of the headrail.
​
2. Mount the end brackets. Each blind comes with 2 brackets and 4 screws. Brackets are marked left and right. On outside or ceiling mounts, brackets should be spaced an additional 1/4" on each side of headrail. Place brackets at the reference mark and mark the screw holes with a pencil. Select diagonal (right top left bottom) holes to assure a secure installation and avoid splitting the window frame. Space center support brackets evenly along the width of the blind. Position each bracket so that it will not interfere with the hardware inside the headrail. Line-up the top of the center support bracket with the top of the end brackets, mark for screws. Insert and tighten screws through all brackets, making sure all brackets are straight and level.
​
3. The following should be done prior to the final installation of the blind. The valance that is sent with all horizontal blinds will be attached with either of the following items; Pre Attached hook and loop tape (instructions to follow) or with valance clips, that will need to be attached to the headrail at this point. Next, if the tilter is a wand and it was not pre attached, the wand should now be attached to the tilter shaft.
​
4. Mount the blind by sliding the headrail into the brackets. Press the front hinged cover plate until it snaps in place.
​
5. To install the valance with clips, insert the valnce into the clips. If with the preattached hook and loop, remove the covering from the adhesive strip and gently push the valance against hook and loop tape strips for adherence. Note: Once hook and loop tape is adhered it can not be removed.
​
*If hold down brackets were requested they can be installed after blind has been hung. Release blind to full length and mark each side of blind directly across from hold down pin in bottom rail. Make sure that marks are placed at the same level of the door/wall. Place top of hold down bracket at mark, screw the brackets to the mounting surface. Pull blind down and slip the pins into the brackets and bottom rail.
FLORIDA SUN SHADE
​
Our latest PVC sun screen shades are made with a basket weave netting design made expressly for those insulating and glare-blocking applications which require a more private and non-directional fabric. The material is made of a fiberglass yarn consisting of 80 % PVC and 20% Polyester. All roller shades come standard with a continuous loop clutch mechanism for easy control. This system raises and lowers the sun shades smoothly and evenly for trouble-free performance. No more long, dangling cords or frustrating cord locks or cleats.
​
• Comes as a 3%, 5% or 10% openness factor for more privacy.
• All mounting hardware and screws are included. (hardware is white)
• For fuller fabric look, you can select a Roman Fold Roll Up for a slight upcharge.
• Wide range of colors to choose from to match any decor.
• Optional 3 1/2" Dust Cover Valance is available as well as aluminum fascia and other options.
• Comes with the Continuous Loop Clutch Roller for smooth operation.
• Motorization is also available for all roller shades
2” ECOWOOD HORIZONTAL BLINDS COLLECTION
​
Primo Remodeling sells the highest quality Fauxwood blinds. They have the look and feel of a ‘Real wood blinds, but at a more economical price. Our 2" faux wood blinds never yellow, because they are 100% Ultra Violet controlled. Our faux wood blinds are treated with an Anti Static control, leaving you less dust on your blinds. You will not have to worry about warping or cracking, so it is a great product for areas of moisture or humidity, such as bathrooms, kitchens and the garage.
FEATURES:
• Comes standard with a deluxe, 3" tall crown valance.
• Standard "V" shaped trapezoid bottom rail for improved closure.
• All mounting hardware and installation screws are included.
• Available with a cord tilter or wand tilter.
• Cloth tapes are available for only 15% more.
• Designer cloth tapes are available for only 30% more.
• Two on one or three on one headrail is available
• All product components are color coordinated.
2” BASSWOOD HORIZONTAL BLINDS
​
Basswood is derived from trees that are native from North American, Mexico, Europe, some central portions of Asia, and Japan. Basswood is a quick growing tree that eventually reaches heights ranging from 60 to 80 feet. It has widely ovate, coarsely toothed leaves that can grow up to a foot in a length. This tree cannot survive the polluted air of cities. The wood of this variety is light, soft, close-grained, fairly strong, and quite tough.
FEATURES:
• Comes standard with a deluxe, 3" tall royal valance.
• Standard "V" shaped trapezoid bottom rail for improved closure.
• All mounting hardware and installation screws are included.
• Available with a cord tilter or wand tilter.
• Cloth tapes are available for only 15% more.
• Designer cloth tapes are available for only 30% more.
• Two on one or three on one headrail is available.
• All product components are color coordinated.
2” BASSWOOD HORIZONTAL BLINDS
​
Basswood is derived from trees that are native from North American, Mexico, Europe, some central portions of Asia, and Japan. Basswood is a quick growing tree that eventually reaches heights ranging from 60 to 80 feet. It has widely ovate, coarsely toothed leaves that can grow up to a foot in a length. This tree cannot survive the polluted air of cities. The wood of this variety is light, soft, close-grained, fairly strong, and quite tough.
FEATURES:
• Comes standard with a deluxe, 3" tall royal valance.
• Standard "V" shaped trapezoid bottom rail for improved closure.
• All mounting hardware and installation screws are included.
• Available with a cord tilter or wand tilter.
• Cloth tapes are available for only 15% more.
• Designer cloth tapes are available for only 30% more.
• Two on one or three on one headrail is available.
• All product components are color coordinated.
VERTICAL BLINDS FABRIC COLLECTION
​
Our vertical blinds offer you the appearance of a drapery. Our finely engineered track allows you to regulate just the right amount of light through its uniformly spaced scissor carriers and will give you many years of trouble free operation. All of our vertical blinds come standard with mounting brackets and safety devices.
FEATURES:
• An optional 3 1/2" valance is available at no extra charge.
• All mounting hardware and installation screws are included.
• Valance corner clips are made of clear plastic.
• Optional rounded valance corners available.
• Heavy duty track system comes standard with self aligning carriers.
• Limited Lifetime Warranty against defects in parts and workmanship.
VERTICAL BLINDS – PVC
​
Our vertical blinds offer you the appearance of a drapery. Our finely engineered track allows you to regulate just the right amount of light through its uniformly spaced scissor carriers and will give you many years of trouble free operation. All of our vertical blinds come standard with mounting brackets and safety devices.
FEATURES:
• An optional 3 1/2" valance is available at no extra charge.
• All mounting hardware and installation screws are included.
• Valance corner clips are made of clear plastic.
• Optional rounded valance corners available.
• Heavy duty track system comes standard with self aligning carriers.
• Limited Lifetime Warranty against defects in parts and workmanship.
HIFER SHEERWEAVE ROLLER SHADES
​
These solar shades have a basket weave design made expressly for those insulating and glare-blocking applications which require a more private and non-directional fabric. The material is a PVC-coated fiberglass yarn. All Sheerweaves roller shades come standard with a continuous loop clutch mechanism for easy control. This system raises and lowers the sun shades smoothly and evenly for trouble-free performance. No more long, dangling cords or frustrating cord locks or cleats. This product is perfect to finish a room and black some of the sunlight while keeping your view.
FEATURES:
• All mounting hardware and screws are included. (hardware is white).
• For fuller fabric look, you can select a Roman Fold Roll Up for a slight upcharge.
• Wide range of colors to choose from to match any décor.
• Optional 3 1/2" Dust Cover Valance is available as well as aluminum fascia and other options.
• Comes with the Continuous Loop Clutch Roller for smooth operation.
• Motorization is also available for all roller shades.
BLACKOUT ROLLER SHADES (100% VINYL BLACKOUTS)
​
Our 100% vinyl roller shade material provides complete privacy and is available in many popular colors. This roller shade comes standard with our Deluxe Clutch Lift System. These vinyl roller shades are a durable, easy to clean and easy to operate, making them an excellent choice for children bedrooms, laundry rooms, utility rooms and study rooms. The vinyl material of these roller shades is excellent at blocking light from passing through it. Note however that roller shades have gaps on each side between them and the window opening; this gap will allow some amount of light into the room.
FEATURES:
• All mounting hardware and installation screws are included.
• Available in many popular colors that will blend with any decor.
• Our Roller shades are Room Darkening to block light from entering the room.
• Also available 3 1/2” dustcover valance and aluminum fascia to give it a finished look.
• Many options available such as upgraded controls, motorization, side rails and more.
• Base Deductions for roller shades can be found here:Roller shades deductions
Upgrade to:
NIGHTFALL BLACKOUT
​
Our latest PVC blackout material is made expressly for those wanting a beautiful fabric to go along with blackout capabilities. The material, along with the Midnight blackout, is a flocked material to provide a soft texture, just like Phifer 7000 series but at a fraction of the cost. Nightfall has a raindrop like design on the fabric to give it a different look.All roller shades come standard with a continuous loop clutch mechanism for easy control. This system raises and lowers the sun shades smoothly and evenly for trouble-free performance. No more long, dangling cords or frustrating cord locks or cleats.
FEATURES:
• A flocked blackout material at huge savings.
• Rain drop like design to give a unique look.
• All mounting hardware and screws are included. (hardware is white)
• For fuller fabric look, you can select a Roman Fold Roll Up for a slight upcharge.
• Wide range of colors to choose from to match any decor.
• Optional 3 1/2" Dust Cover Valance is available as well as aluminum fascia and other options.
• Comes with the Continuous Loop Clutch Roller for smooth operation.
• Motorization is also available for all roller shades.
• Base Deductions for roller shades can be found here